Basic

Glyph	Begin
= Input	None
= Output	None
= Cost	0
= Comment	Indicates the beginning of an automata.

Glyph	Take <Location>
= Pick	Pick a location. This glyph will take the value of that location.
= Input	None
= Output	Value at <Location>
= Cost	10
= Comment	Takes the value at <Location> and makes it available to be used as input to the next glyph. Note that <Location> will be empty after this.

Glyph	Put <Location>
= Pick	Pick a location. This glyph will take the value of that location.
= Input	Any value
= Output	None
= Cost	10
= Comment	Takes the output of the last glyph and puts it at <Location>. Note that this will fail if <Location> already contains a value.

Glyph	Spacer
= Input	None
= Output	None
= Cost	10
= Comment	Does nothing.

Creation

Glyph	Create Particles <Amount> <Type>
= Pick	Pick an amount. This glyph will create that amount of particles.
= Pick	Pick a type except Force. This glyph will create particles of that type.
= Input	None
= Output	<Amount> particles of type <Type>
= Cost	The cost of this glyph is equal to <Amount>
= Dominant	The glyph is <Type> dominant.
= Comment	A picked glyph used to create particles.

Glyph	Create Force <Amount>
= Pick	Pick an amount. This glyph will create that amount of particles.
= Input	None
= Output	<Amount> particles of Force
= Cost	The cost of this glyph is equal to 2 * <Amount>
= Dominant	The glyph is Force dominant.
= Comment	A picked glyph used to create force.

Glyph	Create Atoms <Amount> <Type>
= Pick	Pick an amount. This glyph will create atoms equal to that amount.
= Pick	Pick a type of atom. This glyph will create atoms of that type.
= Input	None
= Output	<Amount> grains of <Type> matter.
= Cost	<Amount> * <Cost of Type> * 5
= Comment	A templated glyph used to create matter. See your Material Compendium for the types of atoms you can create and the associated cost multiplier. Several parameters of the new matter are determined by what type of matter is created. Please see your Material Compendium for details.

Glyph	Create Inverse
= Input	An amount of particles.
= Output	The inverse of the input particles. If the input is not particles, an error value will be output.
= Cost	200
= Dominant	This glyph is dominant of the inverse type of IN1.
= Comment	Modifies IN1 to output its inverse.

Transmutation

Glyph	Combine
= Input	Two particle values.
= Output	The combination of both values.
= Cost	50
= Comment	Combines IN1 with IN2. The type of the parameters determines what happens.
	* If IN1 and IN2 are the same type, the output will be IN1 + IN2.
	* If IN1 and IN2 are opposites, the output will be IN1 - IN2.
	* If they are unrelated, IN1 will be output.
	* If either input is a non-particle value an error value will be output.

Glyph	Join
= Input	Two values.
= Output	This glyph is used to create complex structures, called aggregations, from base particles.
= Cost	100
= Comment	Joins IN1 and IN2 together to create an aggregation. Aggregations of particles are atoms. Aggregations of atoms are molecules. Aggregations of molecules are objects. Note that this process can not be reversed. This process is potentially wasteful. It will create matter equal to the lowest amount of the inputs.

Glyph	Apply
= Input	Two values.
= Output	IN1 modified by IN2, see below.
= Cost	150
= Comment	Applies IN2 to IN1. This has different results depending on the types of IN1 and IN2.
	* If both inputs are particles IN1 is output.
	* If IN1 is not particles, atoms or molecules, IN1 is output.
	* If IN2 is an atom, molecule or something else IN1 is output.
	* If IN2 is Force, IN1 will be accelerated by that amount of force.
	* If IN2 is Fire, IN1 will be heated 1C for every 50 Fire.
	* If IN2 is Water, IN1 will be cooled 1C for every 50 Water.
	* If IN2 is Earth, IN1 will be compressed with 1 Pa for every 50 Earth.
	* If IN2 is Air, IN1 will be expanded with 1 Pa for every 50 Air.
	* If IN2 is Spririt, IN1 will be pulled closer to the material world.
	* If IN2 is Divine, IN1 will be pushed towards the divine realms.
	* If IN2 is a Trigger target, IN1 will be shaped in such a way that it fits onto the target like armour.

Convenience

Glyph	Heat
= Input	A value of atoms or molecules and an amount of Fire.
= Output	IN1 heated by IN2.
= Cost	200
= Dominant	Fire
= Comment	Heats IN1 using IN2, as if using the Apply glyph. Will do nothing if IN1 is not atoms or molecules or if IN2 is not Fire.

Glyph	Cool
= Input	A value of atoms or molecules and an amount of Water.
= Output	IN1 cooled by IN2.
= Cost	200
= Dominant	Water
= Comment	Cools IN1 using IN2, as if using the Apply glyph. Will do nothing if IN1 is not atoms or molecules or if IN2 is not Water.

Glyph	Propel <Amount>
= Pick	Pick an amount of Force. This glyph will create that amount of force and use it to propel IN1.
= Input	A value of particles, atoms or molecules.
= Output	IN1 accelerated by <Amount> force.
= Cost	<Amount> + 200
= Dominant	Force
= Comment	A convenience glyph used to propel objects created using primordial magic. Will do nothing if IN1 is not particles, atoms or molecules.

Artithmetic

Glyph	Add
= Input	Two values.
= Output	IN1 + IN2
= Cost	100
= Comment	Adds IN1 to IN2. The output type is always the same type as IN1.

Glyph	Subtract
= Input	Two values.
= Output	IN1 - IN2
= Cost	200
= Comment	Subtracts IN1 from IN2. The output type is always the same type as IN1.

Glyph	Multiply
= Input	Two values.
= Output	IN1 * IN2
= Cost	300
= Comment	Multiplies IN1 by IN2. The output type is always the same type as IN1.

Glyph	Divide
= Input	Two values.
= Output	The floor of IN1 / IN2 when IN2 is not empty.
= Output	An error value when IN2 is empty.
= Cost	500
= Comment	Divides IN1 by IN2. The output type is always the same type as IN1.

Glyph	Modulo
= Input	Two values.
= Output	The remainder of IN1 / IN2 when IN2 is not empty.
= Output	An error value when IN2 is empty.
= Cost	500
= Given	Divides IN1 by IN2 and outputs the remainder. The output type is always the same type as IN1.

Glyph	Minimum
= Input	Two values
= Output	Whichever value is the smallest.
= Cost	100
= Comment	This will compare two values and output the smallest. Type is ignored for this comparison.

Glyph	Maximum
= Input	Two Values
= Output	Whichever value is the greatest.
= Cost	100
= Comment	This will compare two values and output the greatest. Type is ignored for this comparison.

Triggers

Trigger	Touch
= Input	None
= Output	When touching something, a value representing the thing touched. Otherwise nothing.
= Cost	100
= Comment	Checks if the activator or the object inscribed touches something. Which one exactly is determined by the inscriber.

Trigger	Word
= Input	None
= Output	If the word is said, a value representing the direction in which the activator is currently standing. Otherwise nothing.
= Cost	200
= Comment	Checks if a certain command word is spoken. The command word is chosen by the inscriber, as well as whether anyone or only the activator can trigger it.

Trigger	Gesture
= Input	None
= Output	If the gesture is performed, a value representing the direction in which the gesture is performed. Otherwise nothing.
= Cost	200
= Comment	Checks if a certain gesture is performed. The gesture is chosen by the inscriber, as well whether anyone can trigger it or just the activator.

Trigger	Particle
= Input	A value to trigger on.
= Output	IN1 if touched by a value matching IN1, otherwise nothing.
= Cost	100
= Comment	Checks if either the activator or the object inscribed is touched by a value equal to that of IN1. Note that the value does not need to be created by primordial magic.

Emotion Manipulation Glyphs

These glyphs produce effects that manipulate emotions of others.

Glyph	Fear <Duration>
= Pick	Pick a duration in seconds. This glyph will produce enough substance for a Fear effect of that duration.
= Input	None
= Output	An amount of substance that can be used to produce a Fear effect when it comes into contact with someone.
= Cost	750 * <Duration>
= Comment	Using specially crafted atom-like structures using Divine particles, it is possible to induce a Fear effect in someone.

Glyph	Charm <Duration>
= Pick	Pick a duration in seconds. This glyph will produce enough substance for a Charm effect of that duration.
= Input	None
= Output	An amount of substance that can be used to produce a Charm effect when it comes into contact with someone.
= Cost	750 * <Duration>
= Comment	Using specially crafted atom-like structures using Divine particles, it is possible to induce a Charm effect in someone.

Flow Control

Glyph	Wait
= Input	One value
= Output	None
= Cost	10
= Comment	Waits for a number of seconds equal to value. Waiting costs no addiitonal power.

Glyph	Loop
= Input	A value.
= Output	IN1 reduced by 1.
= Cost	10
= Comment	This glyph can be used to create loops in the power flow of an automata. The first time this glyph would be considered for the next glyph to flow power to, it is ignored. The second time it will be activated as normal.

Glyph	Branch
= Input	A value.
= Output	IN1
= Cost	10
= Comment	This glyph will divert the power flow. It checks to see if IN1 is a value. If it is, the flow of power continues normally at the next glyph. If the value is empty instead, it will skip the first glyph it finds and instead divert the flow to the next glyph.

• Printer-friendly version
• Log in or register to post comments